Ratoc Systems Ultra SCSI (FAST-20) Card Bus PC Card REX-CB31 Guía de usuario descargar pdf (Pagina 12)

Windows95

2. Setup

2-2-1. Installing the CB31U on Windows 98

1. Check to see if your PCMCIA Controller supports CardBus PC Cards.

a. Click My Computer with the right button.

b. Select Properties. You will see the System Properties window below.

c. Click the Device Manager tab.

d. Double-click on the PCMCIA socket string and make sure there is a CardBus controller name

string without “!” or “X” marks.

NOTE

If a CardBus controller name string does not appear, or if it appears with a “!” or “X” mark next

to it, enable the CardBus controller with PC Card (PCMCIA) Wizard. For more information,

please contact your PC manufacturer.

2-2. Windows 98 Setup

Here’s how to get started with the CB31U and SCSI devices on Windows 98:

1. Check the restrictions before you install the CB31U.

2. Install the CB31U into the PC. Refer to Chapter 2-2-1.

3. Confirm the installation. Refer to Chapter 2-2-2.

4. Remove the CB31U from the PC. Refer to Chapter 2-2-3.

5. Connect the CB31U to the PC. Refer to Chapter 3-1.

6. Confirm the SCSI connection. Refer to Chapter 3-2.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 103 104

Sin comentarios

Ratoc Systems Ultra SCSI (FAST-20) Card Bus PC Card REX-CB31 Guía de usuario Pagina 12